A WiFi repeater may be a very helpful tool if you’re having trouble getting a WiFi signal in different parts of your house. This is a frequent but nonetheless bothersome issue. We’ve walked through the process of WiFi repeater setup in this post, making installation a straightforward affair.

First-generation WiFi extenders, or WiFi repeaters, rebroadcast your WiFi network to connect wireless devices beyond the initial range of your router. Therefore, if you need to increase the network range in your house, just follow these easy instructions to set up a WiFi repeater and take advantage of a better and more dependable internet connection throughout your whole living area.

A Guide to WiFi Repeater Setup 

You need to follow certain steps in order to perform the WiFi repeater setup. We will guide you on how to perform a WiFi repeater setup. Follow the below guidelines to perform the complete setup: 

1. Gather Equipment: Ensure you have all the required hardware before configuring the WiFi repeater. A repeater, an already-existing home Wi-Fi router, a Wi-Fi network that you know the password to, and a computer or smartphone are required. 
2. Choose the best spot: Select a good spot for your WiFi repeater. It must be close to the locations where you require a stronger connection and within the range of your current WiFi network. Plug it into a power outlet in a clear, open space if possible.
3. Turn on the WiFi extender: Attach the WiFi repeater to an electrical outlet. For a better signal, make sure it is near the current WiFi router.
4. Make a WiFi repeater connection: Locate the list of accessible networks by going to the WiFi settings on your computer or mobile device. Next, on your wireless devices, search for the Wi-Fi repeater’s network name and choose it.
5. Enter Password: Once you are connected to the WiFi repeater, you now need to enter the password. The password is on the WiFi range extender. You can easily find this password on the repeater or in the instruction manual. However, if you still do not have this password, just call our experts for assistance. 
6. Configure the WiFi Repeater: To configure the WiFi repeater, you need to open a web browser and enter the default IP address of the repeater. This will open the configuration page for the repeater. Now, follow the on-screen instructions. 
7. Connecting to the extended network: Reconnect your laptop, PC, or mobile device to the expanded network after setting up the repeater. Now, return to the WiFi settings and choose the network that shares the same name as your current network, then add the letters “EXT” or “Extended.” 
8. Verifying the connection: To make sure you have a reliable wireless connection after joining the expanded network, check the Wi-Fi signal strength and surf the internet. The formerly unreliable Wi-Fi parts of your house ought to have better coverage.

Troubleshooting Tips for WiFi Repeater Setup 

1. Unable to locate the repeater’s network

The most common problem that arises while repeater testing is trying to find the repeater’s network. There are two methods for handling this issue. In the first, a computer and an Ethernet cable are used to connect the repeater. Using a hard reset, which requires holding down the repeater’s hidden button for around five seconds, is the second technique.

2. The router and repeater cannot be connected.

The repeater’s failure to establish a connection with the router is another frequent problem that could arise. First, hit the WPA button on the router and repeater to fix this. The WPA is turned on when both devices blink, and they often find each other, so you can continue with the configuration.

If this method doesn’t work, try moving the devices closer to one another; this could help, but it might not always. Restarting the setup after hard-setting the repeater will always fix the issue as a final option.

3. Incorrect Password

You could get an error during setup saying that your WiFi password is incorrect.

First, make sure that the router’s bands are separated in order to handle the issue. Certain routers include “smart connect,” which presents a single network by automatically switching between the 2.4GHz and 5GHz bands. This could make some repeaters confused.

You should see one network labeled as “any_network_name-5G” and the other as “any_network_name” to determine whether you have distinct networks.

Change it under “Wireless” after logging into the router admin interface if you only have one network.

Another workable method is to hard-reset the repeater and try the configuration again.

Conclusion

Setting up a repeater is not easy if you are doing it for the first time. However, we have shared the easy method with you for WiFi repeater setup. This method is easy and helpful. If you follow these techniques, you can effectively connect it to your router. If you feel that you are unable to perform this setup, you can call, email, or message our experts for assistance.